Read Time:19 Minute, 22 Second

How to Use Fruity Parametric EQ 2: The modern methodology is to analyze digital files. As for the known fact, audio signals are represented in digital format. It can be easily edited using DAWs (Digital Audio Workstations) and other popular music recording software.

Fruity Parametric EQ 2 is a neat plugin allowing users to manipulate existing frequencies within a piece of music. There is no need to learn advanced plugins when you have this one on your side.

So, How to Use Fruity Parametric EQ 2

Fruity Parametric EQ 2 is a tool that allows you to manipulate the frequencies in your music. It is a powerful equalizer that can make your mix sound more balanced and polished.

To get started using Fruity Parametric EQ 2, first, open up FL STUDIO. Then, press CTRL+F12 to open the plugin window. You will see a series of tabs on the left side of your screen. Click on “parametric equalizer” to bring up Fruity Parametric EQ 2.

The first thing you need to do when working with Fruity Parametric EQ 2.

Select which track/band you want to use it on. By clicking on the “track” tab at the top of your screen. Then click “add effect” and select “Fruity Parametric Equalizer 2” from the dropdown menu.

Next, click on the “parameters” tab at the top of your screen. Now choose which frequency range you want to adjust. This will open up an interface where you can adjust specific frequencies. In your song/vocal/beat etc. by dragging sliders up or down

19 Ways How to Use Fruity Parametric EQ 2 In Fl STUDIO

Fruity Parametric EQ 2 is one of the most potent equalizers in FL Studio. It can be used to create various sounds, from subtle to extreme. This tutorial will show you ten ways to use Fruity Parametric EQ 2 in FL Studio.

Cut Highs
Boost Bass
Add Presence and Air
Remove Muddy Low End
Reduce Noise and Hum
Remove Feedback from Amplifiers
Process Individual Tracks Separately by Inserting EQ on Master Channel’s Output Channel Strip
Use a Mid/Side Equalizer (EQ) Plugin to Adjust Levels. Left-Right or Front-Back of Stereo Tracks or Mixes Separately without Affecting Other Channels’ Levels at All!
Create a Custom Preset Menu for Fruity Parametric EQ 2 with Your Favorite Settings. So You Can Easily Recall Them at Any Time Without Having To Remember Which Buttons Do What!
Extend the frequency range of your sound
Get rid of unwanted noise and hiss
Create a more even and natural-sounding mix
Reduce or eliminate feedback in your recordings
Make instruments sound more transparent and louder
Improve your guitars tone by boosting specific frequencies
Boost specific frequencies to add power to your bass tracks
Cut out unwanted frequencies for more clarity in vocals and instrument
Use it to add extra punch to drum loops
Create a wider stereo image for your mixes

Cut Highs: How to Use Fruity Parametric EQ 2

The high-frequency area of the audio spectrum is where most sibilance, hissing, and other high-frequency noise reside. This is where you will find the most trouble when mixing, as you may need to reduce or eliminate these sounds from your tracks.

To do this, open your Fruity Parametric EQ 2 plugin and go to the EQ section. Turn on the High Pass filter by clicking the little arrow next to the Frequency slider and selecting “High Pass,” which will open up a new filter section below it.

Turn on the checkbox next to “Enable High Pass Filter” to activate it, and then adjust its cutoff frequency until you eliminate any unwanted noise.

Finally, play around with your other settings until you’re happy with how it sounds!

Boost Bass: With Fruity Parametric EQ 2

1. Firstly, open Fruity Parametric EQ 2 on your computer.

2. Select the type of waveform you want to boost bass in a sine wave or a square wave.

3. Click the “Q” button to open the Q menu. Here, you can choose how narrow or broad your frequency range is. The thinner the content, your boost will be tighter, and vice versa. If you want to increase only low frequencies, select a high number like 20 or 40; if you’re going to raise higher frequencies as well, but less than low ones, like a lower number like 8 or 12 instead!

4. Click on the “Freq” button next to Q to open up another menu where you can change how much boost each frequency range should have by entering numbers into its corresponding box. For example, if you wanted more increase at 50Hz than 100Hz, enter one into the 50Hz box and 0 into 100Hz TV!

Add Presence and Air: How to Use Fruity Parametric EQ 2

In addition to the standard equalization controls, Fruity Parametric EQ 2 also offers a variety of specialized filters that can be used to add presence and air to your audio. These specialized filters include:

High Pass Filter: This filter removes low frequencies from your audio signal, effectively boosting and emphasizing high-end frequencies.

Low Pass Filter: This filter removes high frequencies from your audio signal, effectively boosting and emphasizing low-end frequencies.

Peaking Filters: These filters boost or cut a specific frequency range by either narrowing or widening their filter band. The narrower the band is, the more focused it will be on particular frequency ranges, whereas wider bands affect more frequencies at once but less drastically than thin bands.

Remove Muddy Low End: How to Use Fruity Parametric EQ 2

Fruity Parametric EQ 2 is an excellent tool for removing muddy low ends without affecting the midrange. This can be a challenge, especially if you’re trying to fix a problem with your mix. You’ll start by selecting the Low shelf filter on Fruity Parametric EQ 2’s interface. The Low shelf filter has a frequency knob that controls which frequencies the filter affects.

The next step is to change the type of filter you’re using from Low pass to Bandpass. This will allow you to select a specific range of frequencies causing problems in your mix. You can then adjust the Q value until only those problematic frequencies are removed from your mix—and voila!

Reduce Noise and Hum: How to Use Fruity Parametric EQ 2

If you have an audio track with a lot of noise and hum, it can be challenging to eliminate this problem. There are many ways to do this, but one of the simplest ways is to use Fruity Parametric EQ 2.

This software allows you to reduce the volume of your audio track without changing its pitch or tone. It’s also very easy to use.

First, find the frequency range containing all unwanted noise in your audio track. This will be between 20 Hz and 150 Hz. The lower end is where most people will hear most of their noise, so make sure you’re also hearing it there!

Next, select the band that overlaps with this frequency range (it should look like a rectangle). Then adjust its width until it encloses all the noise in your audio track. Don’t worry if some frequencies in your audio way aren’t being affected. they’ll just be lowered along with everything else by default settings in Fruity Parametric EQ 2. Which are designed to help reduce noise without affecting other sounds much).

Finally, set an appropriate amount for how much volume you want to reduce from each frequency band by dragging left or right on its slider bar. Adjust the width of your selected band to make it smaller or larger. Which will reduce or increase how much volume is reduced/boosted. When you’re satisfied with your settings, click “OK”. Now enjoy listening to music without background noise!

Remove Feedback from Amplifiers:

Step 1: Open Fruity Parametric EQ 2.

Step 2: Go to the “Filter” tab at the top of the window, and select “Low Pass” from the filter type dropdown menu.

Step 3: Click on the “Midi” tab at the top of the window. Then select your audio source from the dropdown menu under “Midi Input.”

Step 4: Next, ensure your “Midi Output” destination is set to your amplifier. Then click “LFO1” to enable it with this tutorial.

Step 5: Now that everything is set up correctly, let’s start! Click on an empty area of your screen to open up Fruity Parametric EQ 2’s main interface. Then drag out a new band using one of your mouse buttons while holding down Shift. You can move this band anywhere on its spectrum by clicking and dragging with your left mouse button, while holding down Shift again (or by right- or middle-clicking).

Process Individual Tracks Separately by Inserting EQ on Master Channel’s Output Channel Strip:

The first step is to process individual tracks separately by inserting EQ on Master Channel’s Output Channel Strip.

On the master channel, click the Output Channel Strip button and select a track from the dropdown menu. Then, click the EQ button and drag it onto the Output Channel Strip. This will create a separate EQ module for each track you have on your project. You can now select which ways to apply an EQ adjustment by clicking on their corresponding input channels in the master channel mixer window.

Use a Mid/Side Equalizer (EQ) Plugin to Adjust Levels Left-Right or Front-Back of Stereo Tracks or Mixes Separately without Affecting Other Channels’ Levels at All!:

Open up your DAW (digital audio workstation) and import the song you want to use.
Use that song’s waveform to help you isolate the sound you want to adjust.
Double-click on the plugin and select “Add Plugin” from the dropdown menu to bring up Fruity Parametric Equalizer 2 (FPEQ2).
Click “Create New Project,” name it whatever you like, then click on “OK” to load it into your DAW.
You’ll see a pop-up window appear with all kinds of options for setting up your EQ settings; here are a few things that might help:
Set the frequency range between 20 Hz and 20 kHz (or even higher if possible) to get as much detail as possible.
Set the Q parameter to 0.5 or higher so you can get a narrow adjustment band.
Make sure your gain is turned all the way down so that no unnecessary boosts occur during playback.
Once you’ve set up your EQ settings, click “Play” on your DAW and play back the song you want to make adjustments for (or just record yourself doing something).
Listen carefully as the song plays through, and try different adjustments until you find one that sounds best with what’s going on in the song (try adjusting different frequencies at other times).

Create a Custom Preset

Fruity Parametric EQ 2 is a powerful equalizer plugin with many options. We will show you how to create a custom preset menu for Fruity Parametric EQ 2 with your favorite settings so you can easily recall them at any time without having to remember which buttons do what!

First, open the plugin and click on the Presets tab in the upper left corner. All the presets should be greyed out at this point because there aren’t any presets yet. If a preset isn’t greyed out, it is currently selected by default and will be used when you load or open a song or project. Now click on New Preset at the bottom of the window:

When you click on New Preset, this will bring up an interface where you can name your new preset and choose which parameters will be displayed when it loads up. For example, if you want to create a custom preset that has everything turned up except for the Bass Cutoff Frequency knob (which controls how much low end gets cut out), then type in “Bass Cutoff” as your name and then check off only that parameter in the dropdown menu. You can also save your preset as either a User Preset or a Factory Preset. A user preset is one that you have created yourself and will only be available in this particular project. In contrast, a factory preset comes with the program and will be available across all your projects (you won’t have to create it again if you open up another song).

Extend the frequency range of your sound:

The Fruity Parametric EQ 2 is a powerful sound processor with many valuable functions for enhancing your audio. One of these functions is the ability to extend the frequency range of your sound. This will allow you to hear sounds usually outside of the human hearing, or it can help make certain sounds more prominent in your mix.

To extend the frequency range, follow these steps:

– Open Fruity Parametric EQ 2 and press [Ctrl]+[Shift]+E to open the analyzer window. Click on the Analyzer tab and select “Audio Spectrum” from the dropdown menu in the top left corner of the window. The analyzer window should now display a graph showing frequency levels over time on its left side and an area where you can type in values on its right side (which will also show up on the graph).

– Adjust sliders on the right side of the window until you find frequencies you want to emphasize or suppress (you can also use the mouse scroll wheel).

Get rid of unwanted noise and hiss:

There are many ways to eliminate unwanted noise and hiss with Fruity Parametric EQ 2.

For one, you can use the band pass filter to eliminate background noise unrelated to the sound you want. This will also help you remove any unwanted sounds from your audio so it doesn’t distract from your message and keep listeners engaged in what you have to say.

Another way is using a high pass filter to reduce low frequencies that might be causing unnecessary noise or hiss. This will help keep the vocals clear and understandable without interference from other frequencies that might negatively affect your message if left unchecked.

The last option is using a low-shelf filter to reduce high frequencies that may be causing unnecessary noise or hiss in an otherwise sound recording. If done correctly, this technique can help keep the vocals clear while allowing enough room to resonate properly without being overpowered by other sounds nearby that may interfere with their natural resonance frequency range (1-3 kHz).

Create a more even and natural-sounding mix:

Fruity Parametric EQ 2 creates a more even and natural-sounding mix.

It’s straightforward to use, but there are some tricks you can use to get the most out of this plugin.

First, click on Input to select where your audio is coming from. Then click on output to determine where you want your audio to go. You’ll notice that there are several options here: “Master Out,” which sends your audio straight to the master track; “Instrument,” which sends it directly to an instrument track; “Instrument Out,” which sends it directly to an instrument track with its volume fader; or “Audio To.” This option allows you to send your audio through another plugin before reaching its final destination. This can be useful if you’re using two different effects with similar settings but different functions—for example, if one is an EQ and the other is a compressor (which raises or lowers the volume).

To get started, ensure that both knobs are set at 0%, then drag them up or down until they reach 100%. You’ll find that each knob has three different modes: Linear, Peaky, and Smooth. The linear mode will increase or decrease all frequencies equally; the Peaky method will increase or decrease the volume of only the highest and lowest frequencies; and the Smoothly way will gradually increase or decrease all frequencies.

Reduce or eliminate feedback in your recordings:

When you’re recording audio, feedback is a common problem. You might be familiar with the sound of feedback if you’ve ever been in a room where someone was playing music and their microphone was too loud. It’s that squealing noise that gets louder and louder until it makes you want to turn down the volume on your speakers or stop listening altogether.

If you’re recording audio, you don’t want to hear that sound from your speakers—especially if it’s your voice! Luckily, there are several ways to reduce or eliminate feedback in your recordings with Fruity Parametric EQ 2.

First, make sure that all other sound sources are turned down or off while you’re recording. This means turning off any other music players, televisions, and other electronics around you and lowering the volume on any speakers in the room where you are recording.

Next, adjust the equalizer settings on your computer to match those of your speakers or headphones if you don’t know what kind of speaker setup you have at home or work yet. Then try playing some music through them first before trying out different equalizer settings until one sounds good enough for what you need it for later on down the road!

Make instruments sound more precise and louder:

The Fruity Parametric EQ 2 is a plugin that can do many things, but one of the most useful is its ability to make your instruments sound more transparent and louder. You can use this plugin to boost or cut frequencies in different places to make your devices sound more like you want them to.

You can use this tool to make the drums in your song stand out more so they are easier to hear. This will help make your music more accessible for people to listen to, which will help them enjoy it more.

This tool can also be used on instruments like guitars or vocals. If a guitar part needs to be rougher in the mix, adjusting the frequency range with this tool may help it become more audible.

This easy-to-use tool provides visual feedback about what changes you’re making so you can see exactly what’s happening with your music at all times!

Improve your guitars tone by boosting specific frequencies:

Improving your guitar’s sound with the Fruity Parametric EQ 2 in FL Studio is easy. There’s a lot you can do with this plugin, but here are a few simple tips for getting started:

1. Boost frequencies for more presence and depth

The Parametric EQ 2 allows you to boost specific guitar frequencies by using its frequency slider. You can also use the Q slider to adjust how narrow or wide the frequency band is. This adds clarity and dimension to your guitar track without affecting other frequencies.

2. Boost frequencies in particular ranges

The Parametric EQ 2 also lets you choose which regions of frequency you want to boost or cut. (low, mid, high), which gives you more control over what areas are affected by your changes. This can also share your tone more presence and depth by emphasizing specific frequencies while minimizing others. For example, if your guitar has too much bass buildup, you could use this feature to cut those low frequencies instead of boosting them!

Boost specific frequencies to add power to your bass tracks:

If you want to add power to your bass tracks without making them sound muddy. Fruity Parametric EQ 2 is your tool.

The parametric equalizer allows you to boost specific frequencies and add more power to your low end without making it sound unnatural.

Select “Parametric EQ 2” from the dropdown menu on the left-hand side of FL Studio’s mixer window to get started.

Then, click the “Band 1” tab and select the frequency range corresponding to your bass track’s lowest note.

Now, click on one of the small black dots at the bottom of the screen. When you do this, a line will appear on your track and display the selected frequency. You can adjust this line until it reaches precisely where you want it to go. This will be where your boost will occur.

Cut out unwanted frequencies for more clarity in vocals and instruments:

When you’re recording vocals or instruments, you want to ensure your tracks are as straightforward as possible. To do that, you’ll need to cut out any unwanted frequencies. With Fruity Parametric EQ 2, you can easily do just that.

To create this effect, first open up Fruity Parametric EQ 2. You can find it under Windows > Effects > EQ2.

Once it’s open, click on the “Source” tab and choose the track or tracks you want to work with in the dropdown menu below it.

Next, click the “Filters” tab at the top of the window to bring up its options panel. From there, click on “Band Pass” in the middle row; this will open up its options panel so you can customize how it works for your needs!

Use it to add extra punch to drum loops:

The first step is to create a drum loop in either FL Studio or your favorite DAW. Next, open Fruity Parametric EQ 2 and click the “External Input” tab. You can choose your audio file from the dropdown menu and click “Open.”

Now that you’ve connected your audio file to the plugin, you can adjust the settings! You’ll want to use the equalizer section of the plugin to boost frequencies that aren’t being picked up by your audio source. The best way to do this is by clicking on one of the bands in the top left corner of the plugin and dragging up or down until you find an area with more sound coming through than before.

Be bold and experiment with different frequencies once you find one that adds a serious punch!

Create a wider stereo image for your mixes:

If you’re using a plugin like this regularly, it’s essential to know that the stereo width knob doesn’t do what you might expect. If you turn up the knob all the way, you’ll reduce the stereo width of your sound. Increasing the stereo width will cause phase cancellation in specific frequencies, making your sound unclear and defined.

Instead, try turning down the width knob until you hear an improvement in clarity and definition—then slowly turn it up until you get to where you want it.

Conclusion: How to Use Fruity Parametric EQ 2 In Fl STUDIO

The EQ2 is a nifty plugin with a few excellent features. It sounds decent, but it still needs to replace several high-end plugins. However, the Fruity Parametric EQ 2 is different than most EQs out there, making it ideal for adding some extra oomph to your audio track.

One significant feature of this plugin is the mid/side mode which allows you to process only specific channels within an audio signal or only certain parts of it. You can choose how you want to process things, which again saves time and lets you focus on other aspects of your music, such as mixing, instead of worrying about frequencies and all that stuff. Many helpful tutorials on Youtube will help you get started with this plugin.